I. Contents available in Megainf DOS Driver:
1. MTDOSIN.EXE --- DOS Utility to install ports.
2. MTCONFIG.CFG --- Configuration file to Remap to customize
I/O Addresses.
3. ug_mt68xx_DOS_Installatio
n_Guide_v10.pdf
--- PDF Document of Installation Guide.
II. Options:
-a[dd] = Add Megainf Ports
-c[onfig]:<parameters> = Configure Megainf Ports
-d[elete] = Delete Megainf Ports
-r[emap] = Remap Megainf ports to legacy ports
-s[ilent] = Silent mode
-t[est] = Test ports (requires external Loop-Back plugs)
-u[nused] = remap to all Unused legacy port i/o base,
without consideration of COM/LPT number
-f = remapping to customize I/O addresses.